Electrostatic spray coating technology is a surface treatment technology that has been rapidly developed in recent years. Its characteristics are solvent-free, environmentally friendly, powder can be recycled, easy to automate production, easy to use, and various coating colors can meet different requirements. Weather resistance performance requirements. Howev...

Gerenlly we find the problems from follows aspect.1.Curing furnace impuritiesThe solution is use a damp cloth and vacuum cleaner to thoroughly clean the inner wall of oven .The focus is on the gap between the hanging chain and the duct. If it is a black large particle impurity, it is necessary to check whether the air supply pipe is damaged or not, and change it if bad.2.Dusting Room ImpuritiesMai...

Electrostatic spray operation process(1) Check and clear each powder supply line and spray gun before painting. (When cleaning the spray gun, make sure that line is in good contact with the nozzle and the powder supply line is clear of the nozzle). And clean the powder spray booth and powder tank.(2) Close the power switch, turn on the electrostatic power, and turn on the powder and fan. Turn on c...

Several Tips for Eliminating Surface Particles in Aluminum Powder Spraying (1) Painting work environmentThe production environment surrounding the dusting room will directly affect the surface quality of the coating. For the coating of the corona electrostatic s...

Relationship between particle size and powder quality:The particle size distribution of plastic powder is closely related to the texture, smoothness, glossiness, particle size, electrification effect, powder fluidization effect, storage stability, and powder recovery rate.1, appearance, leveling and quality. In general, the smaller the particle size of the powder, the better the planarity of the...

Powder paint itself is only a semi-finished product. It is only after spraying and curing that it becomes the final product. Consumers only pay attention to the effect and quality of the coating, that is to say, the use of powder paint is as important as the production of powder paint. If the powder is of low quality, the spraying equipment is better, the pret...

Application range of Sandblasting1, Sandblasting before the coating and bonding of workpiece can remove all the rust and other dirt on the surface of the workpiece, and to establish a very important basic pattern (that is usually called the rough surface), further more via change the abrasives with different particle sizes. for example, the abrasive of fly-swept abrasives to reache different degre...

The powder coating for electrostatic spraying needs to pay attention to the following several parameters in order to ensure the smooth implementation of the electrostatic spraying process and obtain a high-performance coating film.The significant difference between powder coatings and solvent-based coatings is the dispersion medium. In solvent-based coatings, organic solvents are used as the dispe...

1. At present, the powder coatings sold on the market are mainly two kinds of thermal plastic and thermosetting, of which the use of thermosetting powder coatings is very much. The thermosetting powder coating is a kind of coating which is made of thermosetting resin as the membrane material, and then added the curing agent of cross-linking reaction. After heating, it is insoluble and hard. Whe...

Today we got a question from our client, who talking about the diameter of LPG tank to burner.

1. The performance of equipmentIn terms of electrostatic spray equipment is mainly on the extraction rate, the powder capability, processing capacity of complex parts. This indicator is difficult to make sense of the initial contact with friends. We must be careful to understand, carefully compare (COLO spraying test can refer to the relevant workpiece: several typical hard spray workpiece electro...

I received the tanks, but I dont know how is te pneumatic connection, How is the effect to move the powder?Here we show the picture for you understanding.Use the tube contact the bottom of Tank with fluidization button of the back of Control unit.

Normally we can delivery the machines within 3 workdays after getting payment. Most of the parts we can delivery in next day when we get the payment.The spary booth and curing oven we need 2 weeks . The powder coating line it will need 2 months more or less from we get your payment deposit.

We have many new customer who want to purchase our machines, but they do not familiar with the international payment with our company. Our company HANGZHOU COLOR POWDR COATING EQUIPMENT CO.,LTD have good reputation in this industrial and the market. We have many long term business partner in U.S.A, POLAND,PERU, COLOMBIA,ITALY,VIETNAM,COLOMBIA, ECUADOR...For the ...

Type of the conveyor Chain.

What products suitable the power coating?A process called electrostatic spray deposition (ESD) is typically used to achieve the application of the powder coating to a metal substrate. This application method uses a spray gun, which applies an electrostatic charge to the powder particles, which are then attracted to the grounded part.That is to say powder coating can worked on the any metal surfa...

Powder coating is a completely dry finishing technique used on thousands of consumer and industrial goods. The automotive and maritime industries, appliance makers, architects, and builders all rely on powder coating for its decorative and protective properties, which include a lustrous shine, outstanding color selection, and a durable, long-lasting finish.Automatic powder coating planta is more a...

Semi auto powder coating plant, use the manual powder coating systems,but with a overhead conveyor systems.1. Manual powder spray booth2. Manual coating systems3. Overhead conveyor systems, 4. powder curing oven

A simple Manual finishing application plant include these mainly equipments:1.Manual powder coating booth, generally are the small size spray booth, more or less from 1 meter to 4 meters with the cartridge filters, the benefit of this type is change color more easy and quick, and the complete boot ocuppy small space, easy to operation.2.powder cure ovens, especially the batch curing oven with the ...

Type of Powder coating plant. we specializes in offering quality powder coating plant, which meets the requirement of different customers. that is to say dry painting line.1. Automatic powder coating plantAll of working project are drived by the overhead conveyor systems, include the automatic spray booths,reciprocator, tunnel curing ovens ,sometimes with the pre-tratement systems.2.Semi-auto pow...

How to choose the suitable powder coating cure oven ?Choosing the suitable oven for the applications depends on all sorts of variables, including the product size, shape, thickness, material composition, and production throughput, operating cost and type of energy to be used must be considered.Curing Ovens should be designed to ensure efficient use of production labour and minimum maintenance is r...

How many type of heating method of the curing oven?Powder coating curing is the final step in the paint process, the cure oven raises the products and coated material to a specified temperature and holds this temperature for a set time. Typically, 20-30 mins at a set temperature is need to achieve a minimum curing for 20 minutes. There are two types heating method.Direct heating: like electric ove...

A convection oven has five major components.Oven enclosure (shell):contains the environment necessary for the curing process, including a support structure, insulated panels, and product opening seals.Heater unit: the second system at work in an oven is the heater unit.The heater generates the energy for curing and beings the distribution of energy.The most of the heater are the burner, supply fan...

Which powder spray booth is right for me ?when you choose a powder coating equipment for your business, keep in time these three point of advice :1. Always buy a system large enough to paint which you want2. Don't cut corner on your booth.3. Always use a professional powder coating spray gun.The bigger your powder coating systems is, the more business you can makeBefore confirming your new equipme...

How to distinguish the Powder spray booth ?Generally , according to working type, there are manual powder spray booth and automatic powder coating booth.according to the type of powder recycle systems, there are spray booth by filters cartridges ,spary booth coating with multicyclone and monocyclone.1. Powder spray booth basic by filtersThis type is usually manual spray coating and not big product...

Electrostatic painting equipment include:spray booth, high voltage static electricity generator,electrotatic spray gun, powder supply center, powder recycle systems .1. Spray booth roomPowder spray booth is one of the main equipments of the electrostatic powder coating. To maintain a smooth flow of air is a clean room for the operation of the operator to provide a clean working environment. Contro...

Powder coating is dusting equipment (electrostatic spray dryer) the powder coating is sprayed onto the surface of the workpiece, under the effect of electrostatic, the powder will be uniformly adsorbed on the surface of the workpiece, to form a powder coating film.Powder coating through the high temperature baked leveling curing, into a varying results. Powder coating spray effect in the mechanica...

Good penetration performance, can smooth all kinds of diffcult to fight the corner. Powder in all corners of the uniform can be evenly attached. combined with a strong. reaching the thickness of the user's need. the coating is beautiful.On one time, the powder was high, the powder was less, and the powder was saved.Spray gun, anti fall. long-term use is not reliable ignition. long service life.

Process flow of powder coating.Part preparation or the pre-treatmentremove the oil,dusty,rust from the surface of workpiece, and creat the layer of resistant to corrosion increase the adhesion force "phosphate coating"Chemical pre-treatments involve the use of phoshpates or chromates in submersion or spray application. The pre-treatment process both cleans and improves bonding of the powder to the...

What is rate of powder coating spraying?Rate of spray coat the powder coating that is to say how many powder coating adsorb to the workpieces by electrostatic painting of the all of the powder coating, that is to say efficiency of deposition. The efficiency of deposition is higher, recycle of powder is lower.Rate of powder coating spraying relations with the type of spray gun, tecnological paramet...

Powder coating is a dry finishing process that has become extremely popular . Representing over 15% of the total industrial finishing market, powder is used on a wide array of products. More and more companies specify powder coatings for a high-quality, durable finish, allowing for maximized production, improved efficiencies, and simplified environmental compliance. Used as functional (protective...

How to import COLO machines from China?We get more and more enquiries from South America countries, such as Colombia, Peru, Ecuador, Uruguay, Argentina, Domonica...Some times they are just send some emails to ask our products, but no news any more. We think maybe they feel it is impossible or so difficult purchase something from China. In fact it is more easlier than you thonght.For example, If ...

When we got the confirmation of order with client, we also need to know the plug and voltage for the machines, because for every country even in the different place of one country there are not the same. so please let us know exactly the one which you need, avoid the mistake.

Recently, some customers want to order our powder coating machine, spray booth and curing oven, but they want to ask when is the exactly time of the get them.To be frankly to say , now we are in the end of the year of 2014, there have many orders need to finish before our SPRING FESTIVAL vacations (14th to 24th of February). And some service like DHL/FEDEX/TNT or sea shipping will back to work in ...

The advantage of the corona spray gun: Apply to more widerange, use the different type of spay gun with electrization, to satisfy differnt sharp and size of the workpieces. For example:plate, box and pipe , almost all type of powder can be used with corana spray gun, have strong applicability of powder.Easily control the thickness of coating film, and easy to realize automatic powder coating line....

We have a client meet problems with his old spray gun now. He bought our powder coating machine COLO-600 in two year ago, recently he said his gun have problems, he can not adjust the voltage , so we thought because of the problem of cascada. But when received the new casada sitll have probelm. first we need to clean the guy body, second we can change this cascada in other gun to test if it is pro...

Recently we got many enquiry from customers who want to buy powder containers from us, like kinds of powder hopper, but when we quote the shipping cost to them, hardly never got the reply. but only one client replied and asked me why is so expensive?Because the shipping service like DHL/ TNT/ FEDEX/UPS always calculate the cost based on the volume weight, that is to say length by width by hight (c...

1) Which model should I choose?According to your product shapes ,for example it is complex workpieces or simple product to choose the machine function, for example colo-500star compare with other higher price equipment ,it not so good when spray the corner or do recoating Or when spray specially metallic powders ,but for mostly work the colo-500star do Good job too.and according to the coating job...

Any metal or conductive parts withstanding 400 F temperature and requiring resistant, aesthetically appealing coating against corrosion and oxidization. Powder coating is extensively used by the appliance, automotive, agricultural equipment, electronics, fabricated steel, fitness and sporting goods equipment, furniture, garden equipment, medical equipment, office equipment and store fixture indus...