Today we got a question from our client, who talking about the diameter of LPG tank to burner.

Type of the conveyor Chain.

Powder coating is a completely dry finishing technique used on thousands of consumer and industrial goods. The automotive and maritime industries, appliance makers, architects, and builders all rely on powder coating for its decorative and protective properties, which include a lustrous shine, outstanding color selection, and a durable, long-lasting finish.Automatic powder coating planta is more a...

Semi auto powder coating plant, use the manual powder coating systems,but with a overhead conveyor systems.1. Manual powder spray booth2. Manual coating systems3. Overhead conveyor systems, 4. powder curing oven

A simple Manual finishing application plant include these mainly equipments:1.Manual powder coating booth, generally are the small size spray booth, more or less from 1 meter to 4 meters with the cartridge filters, the benefit of this type is change color more easy and quick, and the complete boot ocuppy small space, easy to operation.2.powder cure ovens, especially the batch curing oven with the ...

Type of Powder coating plant. we specializes in offering quality powder coating plant, which meets the requirement of different customers. that is to say dry painting line.1. Automatic powder coating plantAll of working project are drived by the overhead conveyor systems, include the automatic spray booths,reciprocator, tunnel curing ovens ,sometimes with the pre-tratement systems.2.Semi-auto pow...

Powder coating is dusting equipment (electrostatic spray dryer) the powder coating is sprayed onto the surface of the workpiece, under the effect of electrostatic, the powder will be uniformly adsorbed on the surface of the workpiece, to form a powder coating film.Powder coating through the high temperature baked leveling curing, into a varying results. Powder coating spray effect in the mechanica...

If you want to buy electrostatic powder spraying line , provide these data we can recommend the most appropriate solution for you. 1, powder coating typical workpiece Name Size (length, width, height), the proportion, shape (see sketch): 2, If you have identified a hanging manner, the workpiece size of the largest comprehensive data to inform will hang after :( length, width, height) 3, the wo...

why poor adhesion of powder coating and how to solve ?1) dirty or poor substrate pre-treatment :Check the pre-treatment equipment and pre-treatment solution 2) not fully cured coating :Enhance the cure temperature or cure time 3 )thick coating: Reduce static voltage or shorten the time to reduce spray coating thickness 4 )substrate thickness or type of change :Associated with suppliers

Reasons and solutions:Color deviation: (1) caused by the uneven distribution of the powder paint. The solution is to improve the quality of the powder to ensure that the powder L, a, b or less and negative unity. (2) caused by different curing temperatures. The solution is to control the set temperature and the conveyor speed in order to maintain the consistency and curing temperature and time...